Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Filter by Categories
VD906

The VD906 is ‘Fail Secure’ and is:

Designed for gate applications including solar powered systems

The detector operates on any voltage from 10 to 30 volts AC or DC and  draws approximately 1 milliampere while waiting for a car.

The power LED winks continuously once per second to indicate the detector is operating in the low power mode.

This ‘plug & play’ unit is an installer favorite due to its small size, reliability, and also being self setting which makes it easy to install.

VD906 Fail Secure:  when a fault in the system is detected the VD906 will alert the gate control panel to remain closed and secure. The gate and the property will remain closed  until the fault is rectified, making it ideal for safety applications.

Solar Friendly  This ultra low powered vehicle detector is perfect for solar powered applications!

Automatically adjusts its sensitivity level when used on different sized loops.

  • Designed for solar power applications
  • Plug ang Play
  • Small profile, making it perfect for most installations
  • Designed to be cross talk free between other loops
  • Automatically compensates for loop and lead-in sizes
  • Switchless, self adapting to most common installations
  • Fail Secure Operation
  • Wide low-voltage operation

The VD906 vehicle detector is designed for solar powered gate applications.

The VD906 vehicle detector is "fail-secure" and should be used on free exit loops.

VD906 - click to download

LED Indicators: Separate Power and Detect LED’s.  The green Power LED blinks once per second to indicate the detector is operating and powered.  The red Detect LED will turn on when a vehicle is over the loop detection area.

Sensitivity: Automatically compensates for loops lead-in sizes.

Power: This detector is powered with 10 to 30 volts AC or DC.  Approximately 1 mA current.  The relay contacts are rated at 1 amp maximum.

Connector: Removable 7-pin terminal block.

Pin assignments shown below (from left to right).
1: Relay Normally Closed (NC) - contact opens for detect
2: Relay Common
3: Relay Normally Open (NO) - contact closes for detect
4: Power common
5: Power in (10 to 30 Volts AC or +DC)
6: Loop
7: Loop

Size:  Height: 1.52”    Width: 2.9”    Depth: 1.56”

Operating Temperature:  35°F to 165°F (-37°C to 74°C)

{No information available}

VD906 Manual
VD906 Manufacturer Manual